Toppage    facebook instagram






Buoyancy-Arm Handle
Product No. 46124 / 46131 / 46132

Black: 46124
Yellow: 46131 [DISCONTINUED]
Pink: 46132

Multipurpose float that can be used as a buoyancy-arm and as a carry handle.

Available in three colours (black, yellow and pink).
*Colours of the Buoyancy-Arm Handle may differ from the colours shown in the brochure.

On land, the handle allows you to carry your housing securely because of its ergonomic design and non-elastic material. When underwater, the handle will function as a float, and because it is buoyant, will not hinder housing operation.

The optional SA8 Fixed Ball Base Mounting Hardware Kit can be used to fit two SA8 Fixed Ball Bases to the Buoyancy-Arm Handle. This allows you to use the handle as a strobe buoyancy arm or adapt it to your own ideas.

Specifications
Construction: Polyethylene
Depth rating: 50m/165ft.
Service Temperature: 1-40 degrees Celsius/32-104 degrees Fahrenheight
Dimensions (WxHxD): 256x76x62mm/10.1x3.0x2.4inches
Weight on Land: 210g/7.4oz.
Underwater Buoyancy: Approximately 280g/9.9oz.

*Weight on land and underwater buoyancy of individual handles may slightly differ.


Carry Clip Hardware Kit
Product No. 46130

Used to clip the handle to the housing for use as a carry handle.
*Four rubber rings are included with this kit. These prevent the metal lanyard loops from contacting each other directly to reduce noise.

Specifications
Material: Stainless steel (hook base, spacer, fixing bolt, washers, fixing plate and hook)
Synthetic rubber ring
Weight: 96g/3.4oz.
Accessories: Instruction sheet and hex wrench


SA8 Fixed Ball Base Mounting Kit
Product No. 46133

Used to mount two SA8 Fixed Ball Bases to the handle for use as a strobe arm.

*Two SA8 Fixed Ball Bases will be mounted with one kit.

Specifications
Material: Stainless steel
Weight: 25g/0.9oz.
Accessories: Instruction sheet and hex wrench

ML Hand-Strap
Product No. 46118

For MDX housings for mirrorless interchangeable lens cameras.

Housing Lanyard IV
Product No. 46137

This new type of lanyard is convenient for carrying a housing. The hook opening at the end is equipped with a detachable device, and a grommet (silent rubber) is attached to the lanyard hook on the housing side to accommodate video shooting applications.
Can be used with all MDX series housings and other SEA&SEA housings mounted on the Grip-Stay L II.
Effective length : 320mm/12.6inch

*Enlarged image



Copylight (C) SEA&SEA Co., Ltd. All Rights Reserved.