TTL Converters | Mirror Less / SLR Camera Housings | Discontinued Products | SEA&SEA

Mirror Less / SLR Camera Housings
[ Discontinued Products ]

TTL Converters

Housings Accessories

Optical YS Converter/C1 for RDX housing

Product No.50137
A compact unit that converts the camera's TTL signal to a light signal. The converter can be mounted on the camera's accessory shoe and can be connected to (a) SEA&SEA strobe(s) with Fiber-Optic Cable(s) (*). TTL and manual modes can be switched by pushing the mode switch on the housing.
* SEA&SEA's Fiber-Optic Cable II must be used with an Optical YS Converter.

[Compatible housings]RDX-100D

*Enlarged image
FAQ
Specifications
[Controls] Power ON/Power OFF/TTL mode (indicated by blue lamp)/Manual mode (indicated by green lamp)
* Remaining battery level is indicated by flashing LED lamp.
[Auto Power Off]  The converter will automatically power off if the shutter lever or the mode switch is not activated for more than one hour.
* The converter can be re-activated by pressing the mode switch.
[Power Source] 2 x AAA battery (Alkaline: 3.0V / Ni-MH: 2.4V)
[Power Source] (*1) Alkaline: 15 hours / Mi-MH: 12 hours  (*2)
[Construction] Aluminum alloy (case)
[Dimensions (WxHxD)] 54.4 x 41.4 x 48.8mm / 2.1 x 1.6 x 1.9 inches  (without cable)
[Weight] 54g / 1.9oz.
(Housing(s) compatible with Optical YS Converter/C1):  RDX-100D
*1 Operating time depends on the battery brand, temperature and frequency of use.
*2 Operating time tested on 750 mAh batteries.

Movie on “How to Fit the Optical YS Converter in a Compatible Housing” has just been posted on YouTube.
Housings Accessories

YS Converter/C

Product No.50118
O-ring Set
(Product No. 62140)

This converter can be used to attach an external strobe to Canon digital SLR camera housings and allows for TTL adjustment.

This new type of converter lets you use simultaneously two different types of strobes with different discharge characteristics and flash tubes, simply by turning the strobe selector dial. You can also switch between TTL mode and manual mode* depending on the shooting situation. Moreover, you can check the images taken with TTL mode on the LCD monitor of the camera and use the TTL adjustment dial to easily make fine adjustments to the level of light emitted.

*Switching to manual on the converter means activating the manual function on the connected YS Series strobe (depending on the strobe model).

*Enlarged image

YS Converter/C promotional movie
*Click “YouTube” to link there. During video play, the resolution (360p, 480p, 720p) can be changed for higher quality.
Specifications
[Construction] Main body: polycarbonate, Fixing knob: ABS resin, Mounting plate: corrosion-resistant aluminum alloy (alumite coating)
[Controls] OFF / Manual / TTL adjustment dial (from +2 to -2 in 1/3 increments), Strobe selector dial (x 2)
[Battery] CR2 lithium battery (included)
[Strobe-side connector] x 2 (for Sync cord/N)
[Depth rating] 60m / 200ft
[Dimensions (WxHxD)] 68x90x103mm / 2.7x3.6x4.1inch
[Weight] Approx. 400g / 12.3oz (including CR2 battery)
[Compatible strobe] YS-110α, YS-250PRO

Uploaded: Sample images captured by YS Converter/C
Housings Accessories

YS Converter/N

Product No.50117
O-ring Set
(Product No.62140)

This converter can be used to attach an external strobe to Nikon digital SLR camera housings and allows for TTL adjustment.

This new type of converter lets you use simultaneously two different types of strobes with different discharge characteristics and flash tubes, simply by turning the strobe selector dial. You can also switch between TTL mode and manual mode* depending on the shooting situation. Moreover, you can check the images taken with TTL mode on the LCD monitor of the camera and use the TTL adjustment dial to easily make fine adjustments to the level of light emitted.

*Switching to manual on the converter means activating the manual function on the connected YS Series strobe (depending on the strobe model).

*Enlarged image
Specifications
[Construction] Main body: polycarbonate, Fixing knob: ABS resin, Mounting plate: corrosion-resistant aluminum alloy (alumite coating)
[Controls] OFF / Manual / TTL adjustment dial (from +2 to -2 in 1/3 increments), Strobe selector dial (x 2)
[Battery] CR2 lithium battery (included)
[Strobe-side connector] x 2 (for Sync cord/N)
[Depth rating] 60m / 200ft
[Dimensions (WxHxD)] 68x90x103mm / 2.7x3.6x4.1inch
[Weight] Approx. 400g / 12.3oz (including CR2 battery)
[Compatible strobe] YS-110α, YS-250PRO
Zoom in with double tapping.