TTL Converters | Mirror Less / SLR Camera Housings | SEA&SEA

Housings Accessories

Manual Flash Trigger (MFT/CN) for Canon and Nikon

Product No.50144
A device that converts strobe light emission signals into LED light. The battery level check function reduces the risk of not being able to emit light due to a dead battery. Only manual flash is supported. Driving time is about 100 hours.
Specifications
User replaceable  battery (CR1632, coin type lithium battery)
Continuous standby time about 100 hours
Can be issued approximately 12,000 times
Operating environment temperature 1℃-40℃

Optical converter compatible housings also supports the instillation of the MFT.
Canon/Nikon compatible model.
Only strobes that support manual flash can be used.
TTL emission is not possible.

Housings Accessories

Manual Flash Trigger (MFT/S) for Sony

Product No.50145
A device that converts strobe light emission signals into LED light. The battery level check function reduces the risk of not being able to emit light due to a dead battery. Only manual flash is supported. Driving time is about 100 hours.
Specifications
User replaceable  battery (CR1632, coin type lithium battery)
Continuous standby time about 100 hours
Number of possible flashes 12,000 times
Operating environment temperature 1℃-40℃

Optical converter compatible housings also supports the instillation of the MFT.
Sony compatible model
Only strobes that support manual flash can be used.
TTL emission is not possible.

Compatible housings

Housings Accessories

Optical YS Converter/CR for MDX housing

Product No.50143
Converts the Canon EOS R's TTL signal to a light signal. Therefore, strobes can be fired as quickly as the strobes' recycle time. Compatilbe strobes: YS-D2 and YS-D1.
 
Mechanical specifications are the same as other Optical YS Converters.
Specifications
Sea&Sea Optical Converter Firmware Update for YS-D3
 
Sea&Sea has now released firmware for updating existing S&S Optical Converts already in the field to enable YS-D3 compatibility.
In order to update existing S&S Optical Converters, please contact your local Sea&Sea Dealer or Sea&Sea Distributor.
Please note that the YS-110α position is utilized on existing Optical Converters for YS-D3 functioning. 
 
The following Optical Converters, shipping from October 2020, are updated for D3 compatibility. Updated Optical Converters are distinguished by a “D3” position.
 
Note: After completing the update on existing units in the field and all Optical converters shipping after October 2020 will not be compatible with the YS-110αstrobes.
 
If you have any questions, please contact your local Sea&Sea Distributor

Housings Accessories

Optical YS Converter/C2 for MDX housing

Product No.50142
A compact unit that converts the camera's TTL signal to a light signal. The converter can be mounted on the camera's accessory shoe and can be connected to (a) SEA&SEA strobe(s) with Fiber-Optic Cable(s) (*). TTL and manual modes can be switched by pushing the mode switch on the housing.
* SEA&SEA's Fiber-Optic Cable II must be used with an Optical YS Converter.

[Compatible housings]MDX-7D Mark IIMDX-5D Mark III ver.2 (with Canon EOS 5Ds or 5DsR).

*Enlarged image
FAQ
Specifications
[Controls] Power ON/Power OFF/TTL mode (indicated by blue lamp)/Manual mode (indicated by green lamp)
* Remaining battery level is indicated by flashing LED lamp.
[Auto Power Off]  The converter will automatically power off if the shutter lever or the mode switch is not activated for more than one hour.
* The converter can be re-activated by pressing the mode switch.
[Power Source] 2 x AAA battery (Alkaline: 3.0V / Ni-MH: 2.4V)
[Power Source] (*1) Alkaline: 15 hours / Mi-MH: 12 hours  (*2)
[Construction] Aluminum alloy (case)
[Dimensions (WxHxD)] 54.4 x 39.5 x 53.3mm / 2.1 x 1.6 x 2.1 inches  (without cable)
[Weight] 54g / 1.9oz.
*1 Operating time depends on the battery brand, temperature and frequency of use.
*2 Operating time tested on 750 mAh batteries.

Movie on “How to Fit the Optical YS Converter in a Compatible Housing” has just been posted on YouTube.
Sea&Sea Optical Converter Firmware Update for YS-D3
 
Sea&Sea has now released firmware for updating existing S&S Optical Converts already in the field to enable YS-D3 compatibility.
In order to update existing S&S Optical Converters, please contact your local Sea&Sea Dealer or Sea&Sea Distributor.
Please note that the YS-110α position is utilized on existing Optical Converters for YS-D3 functioning. 
 
The following Optical Converters, shipping from October 2020, are updated for D3 compatibility. Updated Optical Converters are distinguished by a “D3” position.
 
Note: After completing the update on existing units in the field and all Optical converters shipping after October 2020 will not be compatible with the YS-110αstrobes.
 
If you have any questions, please contact your local Sea&Sea Distributor
Compatible housings

Housings Accessories

Optical YS Converter/N1 for MDX housing

Product No.50126
A compact unit that converts the camera's TTL signal to a light signal. The converter can be mounted on the camera's accessory shoe and can be connected to (a) SEA&SEA strobe(s) with Fiber-Optic Cable(s) (*). TTL and manual modes can be switched by pushing the mode switch on the housing.
* SEA&SEA's Fiber-Optic Cable II must be used with an Optical YS Converter.

[Compatible housings]MDX-Z7 MDX-D850 MDX-D810 MDX-D7100 MDX-D500

*Enlarged image
FAQ
Specifications
[Controls] Power ON/Power OFF/TTL mode (indicated by blue lamp)/Manual mode (indicated by green lamp)
* Remaining battery level is indicated by flashing LED lamp.
[Auto Power Off]  The converter will automatically power off if the shutter lever or the mode switch is not activated for more than one hour.
* The converter can be re-activated by pressing the mode switch.
[Power Source] 2 x AAA battery (Alkaline: 3.0V / Ni-MH: 2.4V)
[Power Source] (*1) Alkaline: 15 hours / Mi-MH: 12 hours  (*2)
[Construction] Aluminum alloy (case)
[Dimensions (WxHxD)] 54.4 x 39.5 x 53.3mm / 2.1 x 1.6 x 2.1 inches  (without cable)
[Weight] 54g / 5.4oz.
(Housing(s) compatible with Optical YS Converter/N1):  MDX-D7100
*1 Operating time depends on the battery brand, temperature and frequency of use.
*2 Operating time tested on 750 mAh batteries.

Movie on “How to Fit the Optical YS Converter in a Compatible Housing” has just been posted on YouTube.
Sea&Sea Optical Converter Firmware Update for YS-D3
 
Sea&Sea has now released firmware for updating existing S&S Optical Converts already in the field to enable YS-D3 compatibility.
In order to update existing S&S Optical Converters, please contact your local Sea&Sea Dealer or Sea&Sea Distributor.
Please note that the YS-110α position is utilized on existing Optical Converters for YS-D3 functioning. 

 
The following Optical Converters, shipping from October 2020, are updated for D3 compatibility. Updated Optical Converters are distinguished by a “D3” position.
 

Note: After completing the update on existing units in the field and all Optical converters shipping after October 2020 will not be compatible with the YS-110αstrobes.
 
If you have any questions, please contact your local Sea&Sea Distributor
Compatible housings

Zoom in with double tapping.